8
4
USING YOUR APPLIANCE
Before first use, remove all packaging. Connect the charger to the
shaver then connect the charger to the 220-240V AC mains supply.
A full charge will take around 8 hours.
Shaving tips
Make sure your hands are dry when using the shaver and keep away
from water
• Hold the shaver at right angles to the face for best results.
• Try to keep all 3 shave heads in contact with the face
• Use short circular motion when shaving
• Do not press hard against the skin as this could damage the shaver
or cause a rash
• Use the trimmer feature to trim longer hair, beards etc.
CLEANING AND MAINTENANCE
• Ensure the shaver is switched off and disconnected from the charger
before cleaning
• Never immerse the shaver body in water or other liquid
• Do not use chemical or abrasive cleaners
After each use
• Clean the shaver after each use. Press the release button (fig 7) and
open the head assembly. Gently tap out the excess hair clippings
(fig 8). If necessary rinse the removed head assembly under water.
Refit head assembly after cleaning.
Periodic maintenance
• Perform periodic maintenance after around 300 minutes use.
• Place a drop of liquid soap on the inside near the cutter (fig 11)
• Brush soap out thoroughly using the brush (fig 12)
• Detach head and unscrew the lock according to the diagram marked
on the lock (fig 13) then remove the lock bracket (fig 14).
• Remove each head assembly then clean with cleaning brush and
water before re-assembly.
• If you experiance skin irriation after many uses, it could be an
indication that the heads are worn and need to be replaced.
Содержание C82006
