8
ASSEMBLY INSTRUCTIONS (CONT.)
14. Attach HAND GRIP #19 to the end of the PLAYER ROD with threaded hole using 5/8” BOLT #11. Attach
ROD END CAP #36 to the opposite end.
15. Attach one MANUAL SCORER #31 to the top of each END PANEL with 3/4” ROUND HEAD SCREW #17.
16. Attach one TWO-PIECE BALL LAUNCHER #27 to each side of the table by inserting the cup into the hole
on the outside of the SIDE PANEL and the launcher into the hole on the inside of the SIDE PANEL and screwing
them together. Fasten each to the table with one 1/2” FLAT SCREW #16.
17. Insert SILVER CUP HOLDERS #32 into the holes in the top of each END PANEL as shown.
#16
#27
#11
