© 2014, Carmanah Technologies Corporation. 72466_R247-E_UserManual_RevA
R247-E 24 HOUR FLASHING BEACON USER MANUAL
EMS PROGRAMMING AND TESTING
13
EMS Programming and
Testing
The EMS will be pre-confi gured at the factory. Use
the onboard interface to check the system status and
confi guration, or to make adjustments if necessary.
The energy management system (EMS) has several
programming functions and settings. These are
accessed through the onboard user interface (OBUI).
This section discusses the various functions, settings
and operation.
EMS Onboard User Interface
Operation
The EMS OBUI has three buttons to navigate and
change settings and activate functions as required.
The up arrow, down arrow and set button are used to
scroll through menus, access and change settings,
and accept new settings.
Functions and Settings
The functions and settings are accessed through the
OBUI via a menu system. On the next page is the
menu hierarchy and a description of the function or
setting.
NOTE
OTE
Only these items in the menu
system are adjustable settings:
nItE, FLAS, tEnP, AAA, FACt, bISt
Use arrow
buttons to
scroll through
the menu.
Press and
hold the set
button to edit
a setting.
Display will
blink when
ready to edit.
Use arrow
buttons to
adjust the
setting.
Press and
hold the set
button to
accept new
setting.
Display will
fl ash 3 times.
set
set
