10
Fold the RIDE
1) Loosen the butterfly knob and nut.
2) Loosen the square screw.
a. Fold the RIDE cymbal as the figure below.
b. Tighten the square screw. Tighten the butterfly nut & knob properly.
Butterfly knob
Square screw
Fold TOM2 and TOM3
1). Loosen the screws on the back of TOM2 and TOM3.
2). Put the pad vertically and adjust the pad position according to the dimension in the figure.
3). Loosen the square screw on the collar and adjust TOM2 & TOM3.
4). Put the collar closely as the figure.
5). Tighten the square screw.
Fold SNARE
1). Loosen the square screw on the clip.
2). Loosen the square screw on the back of SNARE.
3). Adjust SNARE to proper position as the figure below.
4). Tighten the square screw.
Square screw
Square screw
5-7cm
5-7cm
Butterfly nut
