It is forbidden to repair the digger KMC when the machine is working and/or
it is connected to the tractor through the cardan shaft and the 3 points hitch.
Every time some parts are to be repaired or replaced, proceed as follows:
Safely lay the machine on the ground
Always comply with all safety rules and wear overalls, safety gloves and shoes
to protect from any accidental crushing
Replace or repair damaged parts, using
only original spare
parts, supplied
by the manufacturer, dealer or authorised assistance point.
Before starting working again, run slowly the digger to check if it has been
properly repaired and assembled.
FOR ANY DOUBTS PLEASE CONTACT THE DEALER, THE ASSISTANCE POINT OR
DIRECTLY THE MANUFACTURER, CARLOTTI G.&C. S.n.c.
6.1 To order spare parts
To order spare parts, please read spare parts catalogue and always specify:
Model of the implement
Serial number.
Code number of the part required. Lacking this number, specify table number in
which the part is depicted.
Description of the part
Quantity required.
USE ONLY ORIGINAL SPARE PARTS
Orders must be written and sent to the dealer, assistance point or manufacturer by
fax, letter, e-mail,..
The Manufacturer Carlotti G&C snc shall not be held liable for orders made only by
phone and not carried out.
7
SAFETY DEVICES
The machine is equipped with different safety devices, in order to make its use and
maintenance as safer as possible
IT IS FORBIDDEN TO REMOVE AND/OR TAMPER ANY SAFETY DEVICE.
Safety devices:
Protection of the taking of power of the machine, that overlaps to that some
tree cardan shaft
DANGER !
