CARLO GAVAZZI SPT-90, Руководство по эксплуатации, Страница: 15 / 24

15
E
N
G
L
IS
H
Add
: programmable address value: 1
≤
Add
≤
255.
b.dr
: programming of the data baud rate:
Selection Value
9.6_ 9600 bit/s
4.8_ 4800 bit/s
2.4_ 2400 bit/s
1.2_ 1200 bit/s
PAr
: programming of the parity bit.
Selection Parity
no No parity
EUE Even parity
For any further information on the serial interface, see the relevant
literature (available on request).
out
: selection menu of the output working (available only if the open
collector/relay output is present). Set the working of the output in
accordance with the following selections:
Selection Output working
Loc Local (to be used only as set-point/pulse output)
rEn Remote (can be driven only by serial port)
EnE
: selection menu of the energy measurement (selectable only if the
serial output or the pulse output are present, and "out" has been selected
locally). Programmable values:
Selection Energy
E 1 Active energy (Wh).
The negative energy is not added.
E 2 Apparent energy (VAh)
E 3 Reactive energy (VArh)
E 4 Active energy (Wh).
The negative energy is added with its own sign.
The sign of active energy depends on the direction of the current: positive
if it is a consumed energy; negative if it is a supplied energy. The reactive
energy and the apparent energy are always positive.
out
: selection menu of the output working (selectable only if the static
output is present). The static output must be configured locally in the
"S.ou" menu, otherwise the instrument ignores all the previously set