SD2DUG software manual
14
Set A5 channel as DMD synchronization or tariff
management
The A5 output value can be set in two ways:
a) Copying the status of any input channel
b) Via Modbus
Step
Action
1
Copying the status of any input channel
a) Click on
b) Select the input channel from the list, as shown below:
The status of this input will be reproduced on the sync channel A5
EM24: multiplexer (transmission of counter values)
To program the channels to detect the counter values sent by one or more EM24s, follow
this procedure:
Step
Action
1
Click on
one
of the channels belonging the first group to be programmed from
C to F:
