7
ENGLISH
FRANÇAIS
ESPAÑOL
ITALIANO
DANSK
DEUTSCH
Pin assignment and colour code:
1 Pink
[PK]
Not connected
2 White [WH]
Test input –*
3 Green [GN]
Test input +*
4 Yellow [YE]
Motion Output
5 Red
[RD]
Safe Output (presence zone)
6 Grey
[GY]
Common output
7 Blue
[BU]
– Supply
8 Brown [BN]
+ Supply 12 to 24 VAC/DC
* Active high: ON > 9 VAC/DC, OFF < 6 VAC/DC
Active low: ON < 6 VAC/DC, OFF > 9 VAC/DC
Door control system connection:
Electrical Connection
8 (BN)
1 (PK)
3 (GN)
6 (GY)
4 (YE)
5 (RD)
+ Supply 12 to 24 VAC/DC
Common Output
7 (BU)
2 (WH)
-
Safe Output (presence zone)
Motion Output
Test Input +
Test Input -
Not Connected
1
8
7
6
5
4
3
2
Supply
Cable plug front view
Motion
(radar)
detector
input
(inside)
Motion
(radar)
detector
input
(outside)
Power
Supply
12-24 VAC
12-24 VDC
Power
Supply
12-24 VAC
12-24 VDC
Test
output
safety
sensor
(inside)
Test
output
safety
sensor
(outside)
Signal
input
safety
sensor
(inside)
Signal
input
safety
sensor
(outside)
-
-
+
+
Guardian 2 inside
Guardian 2 outside
Door control system
br
own (8)
br
own (8)
Blue (7)
Blue (7)
Red (5)
Red (5)
Gr
ey (6)
common
Gr
ey (6)
common
Yellow (4)
Yellow (4)
+
+
Gr
een (3)
Gr
een (3)
White (2)
White (2)
N.C.Pink (1)
N.C.Pink (1)
-
-
ON
DIP
1 2 3 4 5 6
MIN MAX
TEST HIGH
SAFE NO
MOTION NO
UNI-DIR.
LOW
NC
NC
BI-DIR.
5 MIN
1 MIN
30 SEC
10 SEC
SENSITIVITY
PRESENCE
TIME
MIN MAX
MIN MAX
MIN MAX
MOTION AREA ADJUSTMMENT
CENTER
LEFT
RIGHT
TEACH-IN
TÜV NOT TÜV
Note:
Before switching on the unit, remove all objects from the detection area that
do not form part of the usual surroundings of the door . Also make sure that
nobody is within the motion area of the door during the teach-in phase .
The first time the sensor is powered up, all LEDs will form a running light . This
means that there is no valid presence zone stored into the sensor and the out-
puts are set at a safe state .
A: Close door .
B: Place markers .
Straight door:
Use 3 markers (see fig . 6)
Curved door inside:
Use 7 markers (see fig . 7)
Curved door outside:
Use 5 markers (see fig . 7 .1)
C: Open the door fully .
D: Store presence zone into the sensor by following step 1 and 2 .
Teaching the Presence Zone:
!
