22
If serial number confirmation is enabled, the popup shown above appears.
Confirm if the tracked relay is the correct one.
If serial number confirmation is disabled, the real time pages are immediately displayed.
In the “
Real time
” page there are 2 folders: “
Alarm status
” and “
Electrical values
”.
The “
Alarm status
”
folder displays the status of all configured non-priority alarms and the
status of all priority alarms.
The characters are GREEN when all is correct, while anomalies are displayed in RED.
The last triggered alarm is displayed at the top of the page.
This will remain until replaced by a new alarm or cleared when DPD is turned off.
The status of non-priority alarms is displayed only if configured.
The status of the priority alarms is always displayed (Off, On or deactivated).
The status of the 2 outputs is displayed at the bottom of the page.
