CARLO GAVAZZI Certus CL20D2A, Инструкция по эксплуатации

Страница: 30 / 31

30
Rev.01 | CERTUS Multifunction Safety Module | © 2017 |
CARLO GAVAZZI Automation
EN
Notes:
This Manufacturer’s Declaration of Conformity is only valid under the condition that:
- the above-mentioned products are protected against accidental touch and are installed as prescribed in the installation documentation.
- we are correctly informed about RoHS compliance of all components and raw material by the relevant suppliers.
- we undertake to transmit, in response to a reasoned request by the national authorities relevant information about the safety modules. The
safety modules must not be put into service until the final machinery incorporating them has been declared to conformity with the provisions
of Machinery Directive, where appropriate.
cert. N. QA130463 cert. N. EA130475
Issue No.:009LA04052017_DRAFT
EU/EC Declaration of Conformity
(DRAFT version, to be used for TUV Nord CERT GmbH verification)
We
CARLO GAVAZZI AUTOMATION SPA,
Via Milano 13, 20020 - LAINATE – ITALY. Tel. +39 02 93176 1 - Fax +39 02 93176 304
declare that the products
Certus Multifunctional Safety Relays CM22D0A, CM40D0A, CM30D1A, CL20D2A
are in conformity with the applicable essential requirements of the following Directives:
Machinery Directive 2006/42/EC
EN 62061:2005+A1:2013+A2:2015 Safety of machinery - Functional safety of safety-related electrical, electronic and
programmable electronic control systems
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for
design
EN 61508:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems
EC Type Examination: TÜV Nord CERT GmbH (notified body 0044), cert. n. 44 205 15 176906
EMC Directive 2014/30/EU
EN 61326-3-1:2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-
1: Immunity requirements for safety-related systems and for equipment intended to perform
safety-related functions (functional safety)
EN 61000-6-4+A1:2011 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for
industrial environments
RoHS Directive 2011/65/EU
EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with respect
to the restriction of hazardous substances
Person that is authorised to compile the technical file is:
Mr. Adriano Salvadore, Via Milano 13, 20020 - LAINATE – ITALY Tel.: +39 02 93176.1
CE marking: design and manufacturing follow the provisions of the European Directives above mentioned
Place/date Lainate, May 12
st
, 2017
Signature ____________________
Name Vittorio Rossi
(Managing Director)
18. EU/EC Declaration of Conformity