CLEANING THE FAUCET, SHANK, AND SMALL PARTS
Clean faucet, shank, and all small parts from the lid periodically
with Carlisle faucet brush #40166.
1. Remove entire upper assembly by unscrewing and pulling the
bonnet off of the spigot.
2. Pull seat cup off of spigot. This is a good time to replace the
seat cup if necessary. Clean all small parts including the gasket
and the vent cap assembly from the lid in a solution of hot water
and urn cleaner
(refer to Step 1 of "Cleaning the Container")
.
3. Rinse all parts thoroughly with hot running water.
4. Depress handle in 'lock open' position. Clean top of bonnet
thoroughly. Snap seat cup on to stem end by applying direct
pressure against the bottom of the seat cup.
5. Screw bonnet back on to spigot.
ASSEMBLY
FAUCET AND SHANK
1. Replace rubber washer on shank.
2. Insert shank through faucet opening from the inside of the unit.
3. Screw on back wing hex nut (nut must be placed with the back
ring facing unit as shown in diagram 1). Tighten to secure
shank to unit.
4. Place front wing nut over shank with threads facing out.
Replace metal 'C' ring on to retaining groove.
5. Attach faucet assembly by carefully placing over exposed end of
shank with spigot facing straight down (see diagram 4).
6. Secure in position by turning front wing nut counter clockwise
over threads on faucet. Tighten.
LID
1. Roll gasket back into groove on plug.
2. Reinsert plug vent through lid (see diagram 4).
3. Secure plug to lid by screwing lid nut over plug vent and
tightening (see diagram 4).
4. Replace washer on underside of vent cap. Screw vent cap on to
exposed end of plug vent.
I N S T R U C T I O N S F O R U S E A N D C A R E O F
C A T E R A I D E
™
X B B E V E R A G E S E R V E R S
P.O. Box 53006
Oklahoma City, Oklahoma 73152-3006
(405) 475-5600 • FAX (405) 475-5607
1-800-654-8210
#104803360
European Distribution Center:
Edisonstraat 84, P.O. Box 110
6900 AC Zevenaar, The Netherlands
Tel +31/(0)316-596550 • Telex 45642
FAX +31/(0)316-340168
SEAT CUP
STEM END
BONNET
HANDLE
DIAGRAM 3
DIAGRAM 4
