EN
If changing the oil, place a suitable container underneath the plug for draining.
It is recommended that the oil should be warm [40-50º C] to facilitate easier draining.
After filling with fresh oil, refit the level and/or drain plugs and clean up any oil spillage.
General overhauls must only be done by authorised ATEX certified service personnel or companies.
The gearbox is supplied factory fitted with Synthetic Oil.
However, if seals start to leak and oil level is reduced, both the affected seal and oil need to be replaced as a
general overhaul of the unit.
The unit must be removed to be drained, maintained and filled with oil.
Maintenance
Gearbox
Every 1000 hours verify the good condition of oil seals and gaskets
Note:
Note:
Maintenance - Gearbox
WARNING
77-3330 R1.3
28/36
www.carlisleft.com
