EN
n1:
n2:
n3:
n4:
Installation
- 104262
Align lug in sensor with notch in plug before fitting.
External surfaces only around o-rings.
Note:
Valve spool end with solid face must be same end as
stroke counter.
Bump stop sits with smaller diameter inside end of
sleeve, slotted face outwards - both ends. Magnet
must sit inside valve block sleeve bore - both ends
(arrowed).
✓
n3
GREASE
KEY
TORQUE
MAGNET HAZARD
(AGMD-010)
n4
77-3336 R1.0
12/24
www.carlisleft.com
