5/10/15-GALLON GALVANIZED TANK ASSEMBLIES – SPECIFICATIONS & OPTIONS
SPECIFICATIONS
GALVANIZED TANKS
Maximum Working Pressure
110 psi
Tank Shell
SA-414 Steel, Galvanized (Zinc)
Tank Lid
SA-414 Steel, Galvanized (Zinc)
Fluid Tube
3/8 in. Steel Pipe, Galvanized
Fluid Outlet (Elbow)
Steel, Zinc Plate
Fluid Valve, Outlet
Brass, Nickel Plate 3/8-18 NPS(M)
Agitator Paddle/Propeller
Nylon, Glass Filled
Agitator Shaft
Steel, Zinc Plate
Agitator Shaft Seal
Engineered PTFE, Stainless Steel
Air Manifold
Steel, Zinc Plate
Plug (Air Manifold Coupling)
Steel, Zinc Plate
Bottom Outlet (Optional Kit)
304 Stainless Steel 3/4-14 NPS(M)
AIR CONTROL OPTIONS
TYPE
APPLICATION
No Regulation (Air inlet pressure gauge
only)
Holding tanks, Transfer tanks, Used where precision fluid pressure control is not
required.
Standard Single Regulation
Provides standard fluid pressure control only. For use where precision control of
both fluid and air pressures is not required. Also Used where atomization air can
be taken from filter/regulator air lines.
Standard Double Regulation
Precision control for use with materials that are best applied at low, closely
controlled, fluid and atomization air pressures. Used with portable air compressors
or with air lines when no other means of air pressure regulation is available.
Extra Sensitive Regulation
Provides extremely accurate, low pressure, fluid pressure control
Extra Sensitive Regulation with
Standard Gun Regulation
Provides extremely accurate, low pressure, fluid pressure control plus precision
control of spray gun atomizing air.
AGITATION OPTIONS
TYPE
APPLICATION
No Agitation
Materials that require minimal or no mixing and/or readily hold any solids in
suspension.
Gear-reduced Drive Agitation
Heavy-duty agitator for medium to high viscosity materials that require mixing
and/or solids suspension.
Direct Drive Agitation
TANK CAPACITIES
Nominal
Capacity
Actual Capacity
5 US Gallons
9.8 US Gallons
10 US Gallons
11.8 US Gallons
15 US Gallons
19.8 US Gallons
EN
77-3133-R9 (6/2022)
4 / 12
www.carlisleft.com
