Microprocessor
Temperature Controls
EZ-Temp
TM
Instruction Manual
Installer/servicer
— Except where specifically stated otherwise,
this manual must be used only by a
qualified service technician
.
Read and follow all instructions in this manual and in the appliance
manual. Failure to comply with this or other requirements in this
manual could result in severe personal injury, death or substantial
property damage.
This symbol calls out a hazard that could cause severe personal
injury, death or substantial property damage if the instructions
given are not followed.
Wiring:
Refer to EZ-Temp data sheet for wiring information.
Verify ratings:
Verify the ratings of the control meet the
requirements of the appliance as specified in the appliance
instructions. Refer to the EZ-Temp control data sheet for
required electrical supply and load ratings. Verify that the
controls, wiring and installation comply with all applicable
codes.
Electrical shock hazard:
Disconnect power to appliance
when wiring or servicing any electrical component.
Scald hazard:
Water hotter than 130°F can cause seri-
ous burns or death. Follow water heating appliance
manufacturer’s guidelines when installing temperature
limit controls - DO NOT install a control that can be set
at a higher temperature than specified. Also verify that
the installation includes all water temperature regulating
means needed to ensure the safety of building occupants,
in compliance with all applicable codes.
Verify operation:
Test the controls/appliance to verify the
appliance operates as specified in the appliance manual
before leaving the installation.
126 Bailey Road
North Haven, CT 06473
Phone 203-680-9401
Fax 203-680-9403
Carlin Combustion Technology, Inc.
T
ech
support
800-989-2275
carlincombustion.com
©
Copyright 2015 — Carlin Combustion Technology, Inc.
