Model 601CRD
Oil Burner
Installation and
Operating Instructions
For Use By Qualified Service Technicians Only
126 Bailey Rd
North Haven, CT 06473
Ph 203-680-9401
Fx 203-680-9403
Tech Support 800-989-2275
carlincombustion.com
©
Copyright 2018 — Carlin Combustion Technology, Inc.
Carlin Combustion Technology, Inc.
“CRD” burners feature a combustion head
incorporating a new design concept which
provides a means to control the air pattern
to match the nozzle requirements. The aero-
dynamics for optimum combustion are easily
adjusted for any nozzle size without changing
the air-handling hardware. The flame front is
initiated inside the air tube so that no erratic re-
circulating gasses from the main chamber area
can quench the flame at the retention ring.
The letters “CRD” stand for “Controlled
Retention-Double Speed.”
Use of a small blower wheel (fan) operating
at 3450 rpm provides a more positive, yet quiet,
air flow which does not yield to normal draft
variations and therefore assures a more con-
stant air-fuel ratio for dependably clean com-
bustion day after day.
Fuel Specification ................................... ASTM U396 No.2
Firing Range ......................................................6.00-13.20*
Motor HP, rpm .................................................½, 3450 rpm
Motor Phase, Hz ............................................Single, 60 Hz
Motor Amps .................................................... 8.4 (approx.)
Motor Volts, Standard ................................................ 120V
Motor Volts, Optional .............................................. 230V**
Motor Contactor .......................................DPST-Optional**
Standard Control Type ............................................. 70200
Control Volts, Hz ............................................. 120 V, 60 Hz
Ignitor ....................................................................... 14,000
Burner Housing ......................................... Rugged Casting
Blower Wheel Diam. x Width .............................. 6
1
⁄
4
" X 4"
2-Stage Fuel Unit Pressure .................................... 150 psi
Oil.Valve Volts, Hz ........................................... 120 V, 60 Hz
Oil Nozzle Specs. ...................................................... 45° ss
Approximate Shipping Weight ................................. 65 lbs
* The maximum high-fire capability shown is for natural draft. With forced draft, the maximum
firing rate is reduced.
** Motor contactor optional for Model 601CRD at an additional cost. Required when motor is
for 230 volts.
