Warranty:
Carl Martin Research warrants the manufacturing, material and proper operation for a period of one year from
date of purchase. Carl Martin will replace defective parts, make necessary repairs or replace the unit at the discression of
our technicians. The warranty applies only to the original purchaser of this product, and excludes any damage or faulty
operation resulting from misuse, neglect or unauthorized service.
Made in China.
East Sound Research Raadmandsvej 24 8500 Grenaa Denmark Phone: +4586325100
E-Mail: [email protected]
Specifications
Input……..........……........ 1M Ohm
Output………………........ 100 Ohm
S/N Ratio......................... 60 dB
Attack.............................. 1mS to 15mS
Release........................... 200mS
Compression................... 12:1
Gain................................ 12dB
Dimensions ..................... 120 (W) x 95 (D) x 56 (H) mm
4.72” (W) x 3.74” (D) x 2.2” (H)
Weight.............................. 350g / 0,78lbs
Power Requirements
Battery: The Classic Opto Comp requires a 9V battery. To
replace the battery, carefully remove the back panel by
loosening and removing the 4 screws, install the new battery
and then re-install the back panel.
Power consumption: max. 20mA.
Power supply: 9 V DC (regulated), 40 mA minimum, 2.1 mm
female plug, center negative (-)
ATTENTION: Please Use DC Power Supply Only! Failure to
do so may damage the unit and void the warranty.
