Carl Goldberg Products FALCON III, Инструкция по эксплуатации

Страница: 22 / 26

22
3. ‡
When all the parts are ready for hinging then
re-mount the hinge with a pin inserted in the
center. when satisfied that all parts are aligned
properly, remove pin. Apply 3 to 4 drops of thin
CA glue to the exposed hinge line. Turn over
and apply another 3 to 4 drops to the hinge line
of the other surface.
‡ Allow 10 minutes for the CA to cure, before
flexing the surface.
‡ Work the surface up and down to remove any
stiffness you may feel.