Carima DP110E, Руководство по эксплуатации, Страница: 15 / 41

12
Maintenance
Cleaning the dust and rubbish off the projector will help use the projector
without any malfunctions.
Warning:
1. Turn the projector off and unplug at least 30 minutes prior to cleaning
the projector. It may cause a serious burn if not.
2. Use a damp cloth. Be careful not to have any water seep into the
ventilation outlet.
3. If any water has penetrated into the projector while cleaning, leave it in
well ventilated area before connecting the power supply.
4. If a large amount water penetrated into the projector while cleaning,
please inquire for repair at the service center.
To clean the lens
Lens cleaning agent can be purchased from a lens store. Clean the lens as
the following instructions.
1. Wet a clean and soft cloth with a small amount of lens leaning agent.
(Do not apply the lens cleaning agent directly on the lens.)
2. Clean the lens in light circular motion.
Notes:
1. Do no use any polishing agent or solvent.
2. Using detergent on the project case may cause discoloring or color
fading.
To clean the case
Please clean the projector case as the following instructions.
1. Clean any dust with a clean damp cloth.
2. Wet a cloth with warm water with soft detergent added in it such as
dishwashing liquid to wipe the case with.
3. Remove any detergent on the cloth and wipe the projector again.
Notes:
1. Do not use polishing agent or detergent containing alcohol since it
may cause discoloring or color fading.