Cargoglide DuraGlide Series, Руководство пользователя и инструкции по установке

Страница: 3 / 4

3
plastic, wood, metal tubing, etc. The Spacers must be placed under all of the slide areas that nor-
mally contact the floor to provide necessary support. Optional Spacer Kits are available for most
models.
*CargoGlide CG1000, CG1200, CG1500 models have built in height adjuster mounts for use on
steel bed vehicles for easy adjustment to clear various tailgate angles or other clearance issues.
Simply turn the adjustment plate to reach the appropriate height. If this feature is used, add spacers
to mid cross member before tightening down bolts, so the bottom frame rails will remain straight and
not bow. **HEIGHT ADJUSTERS, for vehicles with steel beds are optional equipment and are avail-
able to purchase when ordering a CargoGlide.
Standard height adjusters are NOT for use in
ALUMINUM BED VEHICLES, use full width bar spacers only .
Frame Separation
CargoGlide slide frames can be separated to make installation and removal easier.
CG1000, CG1200, CG1500, CG1800HD, CG2200HD models you slide the top open at least 24” lift
up the deck about 18” to 24 “ and move the end you are holding to your right until the roller bearing
and latch pin clear the track (the distance you move to the right varies based on frame length, but is
usually less than 24”). Once the bearing clears the track you can lift the top frame up and out then
slightly to the left so the right side bearing clears the track as well. Once both bearings are clear of
the track you can carry the top frame out from the bottom frame.
Reinstall in the reverse, starting at an angle inserting the right side bearing first, then lower the left
side into place and straighten the frame so the top and bottom are in line and set it down on the roll-
ers of the bottom frame, then it will slide normally.
CG2200XL, CG1500XL, CG1000XL and DuraGlide/DualGlide models have hinged stopper flaps on
the top and middle frames. To separate frames, simply open the slide all the way until it stops, then
close it just enough that you can lift the hinged stoppers while holding the handle open, slide it open
past the stop point, then it will continue to slide open. (Make sure someone is holding each side of
the frame securely as you remove it because it’s weight will drop abruptly as the last bearing exits
the track).
Reinstallation is as easy as simply sliding the frames back into place since the hinged stoppers auto-
matically move as it passes the stop points, then gravity swings them down so the slide will not open
again until you manually lift the hinged stoppers.
Thank you for buying CargoGlide products!
Please let us know if you have any questions while doing the installation.
We really like to see pictures of our CargoGlide products in use. Please send a picture(s) via email
to us at sales@cargoglide.com so we can add it to our gallery of customer shots.
All the best from the CargoGlide crew!
www.cargoglide.com support@cargoglide.com 877-525-9535