8
Vedpak 141GB_Version 2_22.10.09
160793
GB
8
9
2. Installing control box.
A. Connect the Male D-Type (15 pin) system cable end plug
linked with the rear-view mirror to the corresponding
outlet on the ontrol box.
B. Place the control box in an appropriate place in the car.
If necessary, fix the contril box firmly by using the screws.
3. Installing CCd camera.
A. Mount the bracket firmly on an appropriate place on
the vehicle.
B. Reassemble the first camera and adjust the angle to an
ideal position. Fix the camera angle firmly by
fastening attached stainless steel socket screws.
C. Connect the 6 pins mini DIN male end plug onto the
extended cable then guide the cable along the
chassis then connect the male end of the extended cable
onto the outlet on the control box.
D. The camera should be only mounted as illustration
below.
CAUtIoNS:
Because the rear blind zone is directly related with the
installation height of CCD, the CCD camera should be
installed on the proper location of the vehicle.
