Carf-Models DG 800 S, Инструкция по эксплуатации

Страница: 11 / 28

Horizontal stab installation
The horizontal stab is readily built and can bolted on immediately with
the included M5 x 40 mm counter sunk bolts.
Extend the servo wire, either by soldering an
extension or connecting a pigtail socket. Secure
the extension so that it cannot disconnect under
any circumstances.
It is helpful to use the tailwheel opening to feed
the wire forward. Use cable sockets to secure it
to the fuselage wall.
Make sure that it is not rubbing against retract
and carbon formers.