Caretero TOYZ TIMUS, Руководство пользователя

Страница: 17 / 36

17
1. Install the front axle on the underside of the vehicle body
using the screws and a screwdriver. Use plugs and locks to
make sure the axle is seated properly.
2. Install the front motors on the front axle as shown in the
picture. Connect the cables powering the motors with the
cables extending from the car body. The motors are marked
with numbers depending on the place in the system in which
they should be located.
3. Fix the rear axle to the car body using screws and a scre -
wdriver.
4. Install the rear motors on the rear axle as shown in the pictu -
re. Connect the cables powering the motors to the cables
sticking out
from the car body. The motors are marked with numbers depen -
ding on the place in the system in which they should be loca -
ted.
5. At the bottom of the car body, under the door, fix the footre -
sts with screws and a screwdriver. Mount the wheels on the
axles by putting on the rod in turn: a sleeve suitable for the
engine, a wheel, a washer, a lock inserted into the hole in the
axle rod, a hubcap.
6. Install the windshield grille in the holes on the top of the car
body. Connect all power cables.