Caretec Tape King, Руководство пользователя

Страница: 9 / 16

9
When pressing KEY #1 (ON/OFF-key) for a short time the currently measured
angle will be announced and displayed. Press KEY #4 (MENU-key) to exit the
spirit level and clinometer mode.
4.7. CALIBRATION OF CLINOMETER AND SPIRIT LEVEL
You ought to calibrate Tape King’s spirit level before using it the first time. Then
repeat calibration when travelling or if you suspect the measurement results to
be inaccurate. This step is necessary to adapt to local changes in the
gravitational field.
To access the calibration mode enter the MENU-function and choose item
number 5 “spirit level calibration”. Press either KEY #2 (PLUS-key) or KEY #3
(MINUS-key) and you will hear the announcement “calibration, step one: hold
the Tape King on an even surface and press KEY #1”. Follow the instructions
and place Tape King on an even surface and press KEY #1. Then Tape King
announces “calibration, step two: rotate the device 180° degrees and press
again KEY #1”. Now rotate the device by 180° degrees and press KEY #1. Tape
King then announces “calibration finished”.
Now the calibration of Tape King’s clinometer and spirit level is finished.
4.8 HISTORY OF LAST 10 MEASUREMENTS
Within the voice MENU function 6 “history of measurements” you can display
and hear the last 10 measurements which have been saved. To store a
measurement, press KEY #1 (ON/OFF-key) immediately after measuring.
To retrieve the last 10 stored measurements, enter the MENU with KEY #4
(MENU-key) and choose function 6 “history of measurements”. Browse the
measurements either with KEY #2 (PLUS-key) or KEY #3 (MINUS-key). If there
are no measurements stored you will hear an error signal.
Caution:
Do not forget to press KEY #1 (ON/OFF-Key) after
the measurement. Otherwise this measurement will not be
saved in history and cannot be accessed anymore.