![Carefree SIMPLY SHADE WINDOW AWNING Скачать руководство пользователя страница 7](http://html.mh-extra.com/html/carefree/simply-shade-window-awning/simply-shade-window-awning_installation-and-operation-manual_2557057007.webp)
S
IMPLY
S
HADE
W
INDOW
A
WNING
7
I
NSTALLING THE
A
WNING
1.
(Detail A)
Lift the awning up and thread the polyrod (the plastic rod on the
edge of the fabric) into the awning rail. Carefully move across the vehicle,
gently pulling the fabric into the rail until the awning is centered over the
window.
N
OTE
:
While the awning fabric is robust, exercise care not to snag it on the
awning rail.
Tip: For longer window awnings, it may be beneficial to have a second person
help hold one end of the awning while sliding the fabric into the awning rail.
2.
(Detail B)
Position the arms. The bumper pad on the back of the end caps
must align and contact the flat portion of the awning rail and should be
approximately 1/8" below the rail protrusion.
N
OTE
:
The awning rail is cut to the same length as the awning width. The
centerline of the arms should line up with the ends of the awning rail.
N
OTE
:
If an awning rail screw interferes with the bumper, it will be necessary to
remove the screw. The bumper must set flat on the flat portion of the awning rail.
3.
(Detail C)
Ensure that the arm is perpendicular to the awning rail. Secure
the lower mounting bracket using one #8 x 1 truss head screw through the
access hole in the end cap of the arm.
Catch
#10 x 3/4
Screw
DETAIL
A
DETAIL
B
DETAIL
C
(Arm Closed)
DETAIL
F
(Arm Open)
#8 x 1 Screw
SL002
#8 x 1
Screw
A, B, D, G
C, F
E
Fabric
1"
Awning Rail
#6 x 3/8
Screw
Polyrod
DETAIL
G
Bumper
1/8” Gap
DETAIL
E
Remove
Pins
DETAIL
D
Pull Strap
Awning
Valance