Carefree of Colorado Installation
Manual
F
REESTYLE
E
VOLUTION
A
WNING
070036-001r1
13
S
ETTING THE
S
YSTEM INTO
P
AIRING
M
ODE
NOTE:
Kits are paired at the factory for simplified installation. Separate components that are added or
used for replacements must be paired to the existing control module.
NOTICE
Ensure that the kits are kept together and not mixed with other kits. The pairings are
unique to each control module.
NOTE:
The illustration shows the standard Carefree switches. Some OEM’s may choose to furnish their own
switches or incorporate the power and Extend/Retract controls in a multiplexing control system. The following
directions are valid for all configurations.
There are two methods to set the system into pairing mode.
Using the Awning Retract Function:
1. Turn power to the awning ON.
2. Extend the awning. Note that the awning does not have to be opened
completely.
3. Retract the awning.
4. When the awning is fully retracted, press and hold the retract switch for 3
seconds.
Using the Switches:
1. Turn the awning power
switch to OFF.
2. Press and hold the extend
switch.
3. While holding the extend
switch, turn the power
switch ON.
4. Continue to hold the extend
switch for 3 seconds, then
release.
NOTES:
The awning will remain in pairing mode for 5 minutes.
The BT12 control module will pair to the physically closest unpaired device first then go to working mode.
Repeat the pairing for each additional device (the module remembers the devices that have been paired).
Refer to the Carefree Connects Mobile App manual for setting up and pairing a smart device (such as a
smart phone or tablet).
Multiple devices can be paired to the awning up to a maximum of 8 peripheral devices.
o
Only one active BT Motion Sensor can be paired to the BT12 Control Module.
o
Only one active BT Remote can be paired to the BT12 Control Module.
o
Multiple mobile devices (smartphone or tablet) can be paired to the BT12 Module but only 1 can be
active at a time.