F
REEDOM
WM
A
WNING WITH
BT12
9
S
ETTING THE
S
YSTEM INTO
P
AIRING
M
ODE
To add peripheral devices (such as remotes) they must be paired to the BT12 Control
Module.
1. Turn power to the awning ON.
2. Extend the awning. Note that the
awning does not have to be opened
completely.
3. Retract the awning.
4. When the awning is fully retracted,
press and hold the retract switch for 3
seconds.
4.1. The awning is now in pairing
mode for 5 minutes.
5. The BT12 control module will
automatically pair to the device then
go to working mode.
NOTES:
The module will pair to the physically closest unpaired device first. Repeat
the pairing steps for each additional device (the module remembers the devices
that have been paired).
Refer to the Carefree Connects Mobile App manual for setting up and
pairing a smart device (such as a smart phone or tablet).
Multiple devices can be paired to the awning but only a maximum of 8
peripheral devices can be active at one time such as key FOBs and one (1)
mobile device.
Only one active BT Motion Sensor can be paired to the BT12 Control Module.
Only one mobile device (smartphone or tablet) can be active at a time.
