M
ANUAL
P
ATIO
A
WNING
7
U
SING THE
S
TANDARD
O
PTIONS
T
HESE STANDARD OPTIONS ARE PROVIDED WITH THE
S
PIRIT
FX
U
TILITY
R
OLL
B
AR
.
T
IE
-D
OWNS
1. Remove the plastic containing tube from the utility slot roll then remove the
tie down strap and spring from the tube.
2. Place the tube back into the slot for storage. Push tube straight in. (This will cause
the plastic to collapse slightly then “pop” into the slot.)
3. Slide the strap to the end of the roller tube and next to the end cap.
4. Wrap the strap over the top of the tube between the end cap and fabric.
5. Pull the strap out away from the awning.
6. Attach a corkscrew anchor to the end of the shock spring.
7. Pull the strap tight to determine the location of the anchor.
8. Install the anchor into the ground. The head of the anchor should be tilted
away from the awning.
9. After screwing the anchor into the ground, cinch the strap tight.
10. Reverse the procedure for storage.
T
HIN
-L
ITE
The Thin-Lite is stored in the utility slot of the Spirit FX roll bar.
Foam Plug
Coiled
Power Cord
ThinLite004a
Foam Plug
12VDC Power
Receptacle
Plug From Light
Plug Storage
Hole
DETAIL
A
DETAIL
B
Light
1. Extend the awning out completely.
2. Remove the power cord from the utility slot.
3. Slide the light to the desired location along the roll bar.
4. Use the foam plugs to hold the light in position.
5.
(Detail A)
Connect the cord to the receptacle.
NOTE: During times when the light is not needed but the awning remains
extended (such as during the day), the cord can be unplugged to shut off the
light and the plug stored in the storage hole of the receptacle bracket (Detail B).
6. Before rolling the awning up, coil the cord into the utility slot. Push the cord plug
into the foam plug then push the plug toward the light to hold the cord in place.
CAUTION
T
O PREVENT DAMAGE TO THE CANOPY
,
THE CORD
MUST
BE
STORED
IN THE SLOT
BEFORE THE AWNING IS RETRACTED
!
Manual
Compliments
of
Northwest
RV
Supply
Printed
From
http://www.nwrvsupply.com
