C
AREFREE OF
C
OLORADO
I
NSTALLATION
M
ANUAL
OEM
A
SCENT
SC
&
SS
052553-011r6
4
I
NSTALLATION
–
A
SCENT AND
A
SCENT
XL
(
UP TO
353")
C
OMPONENT
C
HECKLIST
I
TEM
D
ESCRIPTION
Q
TY
N
OTE
1
Ascent Assy
1
2
Cover
1 2
3
Awning Rail
1
4
Screw, Self-Drilling
#12 x 1
NOTE
3
5
Screw, Washer Head, Thread Cutter
#10 x 3/8
2
6
Fender Washer
#10
2
7
Screw, Hex Head
#6 x 3/8
2
8
Screw, Shoulder
#8 x 1 1/2
2
2
9
Bracket, Deflector Mount
NOTE
5
10
Cover, Bracket
1 6
11
Screw, Self-Drilling
#12 x 1
5
6
Screw, Self-Drilling, TEK
#12 x 1/2
2
6
NOTES:
1. Product configuration is specified at time of order, including length, fabric, color etc. Check assembly
against original purchase order.
2. The cover (item 2) and screws (item 8) are used with the Ascent SS only.
3. Awning rail is optional and ordered separately.
4. Quantity for screw (item 4) is determined by length of awning ordered.
5. Bracket (item 8) is specified at time of order. For lengths 42" - 114", qty = 2; for lengths 115" - 197", qty = 3;
for lengths 198" – 289, qty = 4; for lengths 290 and longer, qty = 5.
6. Quantities for cover (item 8) and screws (items 9, 10) are per bracket.
U
NPACKING THE
U
NIT
The Ascent is shipped partially assembled. For
installation, it will be necessary to separate the
components.
1. Remove the packing wrap.
2. If included, lift the cover up and set aside.
3. From one end, loosen the end cap screws
approximately one inch. It is not necessary to
remove the screws completely.
4. Slide the end cap away from the deflector.
5. Carefully pull and lift the roller tube assembly out
of the fixed end cap and set aside.
AS002b
1
3
4
5
7
6
11
12
9
10
8
2
as006a
Slide End Cap Out
Roller Tube
w/ Fabric
Chassis
Cover
Figure 5. Unpacking the Unit.
