OPERATION
1. Place transfer bench in tub so the suction cup feet are INSIDE the tub. (If the
preference is for the seat to face the opposite way, legs can be switched to
the other side of the bench by depressing brass push pins, removing legs and
inserting them into the opposite leg receptacles.)
2. Adjust height of legs to desired height by depressing brass push pins and setting
to proper height. Note: Legs should be set to ensure seat is level, taking into
account that the legs inside the tub will have to be set to a lower height setting
because of the difference in height from most tubs to floors.
3. To move seat, pull the red seat positioning lever located under the seat away
from the frame and slide seat until it clicks into place. Note: there are two (2)
positions where seat will be secured to frame, one on the left side and one on
the right side.
FOLDING
To fold for storage or transport, stand bench vertically on one set of legs. On one side
of leg assembly, pull both red locking levers away from frame simultaneously until both
locking pins disengage. Fold legs down. Turn transfer bench over and repeat for second
set of legs. Remove backrest, handle and soap dish if necessary.
