4. Secure the seat into position by turning the locking screw on each side until it comes into contact
with the side of the bath.
5. The seat rotates up to 360 degrees by pulling the lever
upwards, to lock the seat in place, release the lever.
6. Ensure all screws, nuts and bolts are periodically tightened.
7. Clean the chair after each use and disinfect periodically.
Warranty:
Your CareCo branded product is under warranty to be free from defects in material and workmanship
for one year from date of purchase. This warranty expresses our confidence in the workmanship and
materials used for our products.
In the event of a defect covered by this warranty, CareCo will, at our discretion, replace the product
or supply parts to remedy. This warranty does not cover device failure due to owner misuse or
negligence, or due to normal wear and tear. The warranty does not extend to non-durable parts which
are subject to normal wear and tear or/and require periodic replacement.
If you have any queries please contact CareCo.
CareCo, Hubert Road, Brentwood,
Essex CM14 4JE
www.careco.co.uk
Image reference for point 2:
