CareCo MS01117, Руководство пользователя, Страница: 10 / 28

P. 10
If the blue status LED located in centre of the gauge is illuminated solidly then the scooter
is functioning normally.
If the scooter is beeping, this means the scooter has encountered a problem. The scooter
will beep a number of times then pause. Count the number of beeps to determine the
problem.
ΖI\RXH[SHULHQFHDQ\EHHSVHTXHQFHVȴUVWUHVWDUWWKHVFRRWHUHQVXULQJWKHZLJZDJ
paddle is released. If this does not remedy the problem, recharge the batteries.
If the error persists, contact your dealer.
CAUTION
You should recharge the batteries after each use to ensure maximum range.
Read the Battery Charging section in the manual before use.
• Circuit Breaker. The circuit breaker
may trip when the scooter is under
excessive load or when travelling on
steep inclines. It will be more prone
to tripping when the scooter is low
on battery charge. Under normal
conditions the circuit breaker button
will protrude by 2mm – 3mm. If the
circuit breaker has tripped the button
will protrude by 7mm. To reset the
circuit breaker, push the button in and
the scooter should operate as normal.
• Freewheel Lever. The motor can be
disengaged (put into freewheel) to
allow the scooter to be pushed.
Push the lever forward to engage
freewheel mode.
Pull the lever back to engage drive
mode.