Disassembling Your Scooter
www.careco.co.uk
CareCo, Hubert Road, Brentwood, Essex, CM14 4JE
08
Valour -
Travel Mobility Scooter
Seat Disassembling
Tiller Fold Method
Completing Disassembly
Front & Rear Frame
Disassembling
Battery Pack Disassembling
When assembling the Battery Pack (T), make sure the battery terminals are properly connected.
Reassemble your
scooter by reversing the
above instructions.
!
!
Remove seat by lifting Seat Rotation
Lever (J). Then rotate Seat (K) and lift up
away from scooter.
Turn the Cap (I) to fold down the Tiller (U) to the lowest position
as shown in Figure 18. When the Tiller (U) is in the lowest
position it can be locked by the tiller angle adjustment pin.
The Scooter can be disassembled
into 7 main parts as shown below.
Hold front and rear frame and
pull the Release Lever (T) to
disassemble front and rear frame.
As indicated, pull Battery Pack Handle (R) to
remove Battery Box (S) from scooter. Caution :
Battery Box is heavy. When lifting, please use
correct lifting posture to avoid injury. Ask for
assistance if necessary.
K
K
U
I
J
1
3
4
5
2
T
R
S