CareCo Minimus MS01097, Руководство пользователя

Страница: 32 / 44

32
8. INSPECTION AND MAINTENANCE
Tires
The condition of the tires depends on how you drive and use your scooter.
•
Inspecting tire tread
•
Please check the tread groove regularly. Replace the tires when the tread groove is
less than 0.5 mm.
Suggestions
•
Do not splash water directly to wash your scooter as this could lead to malfunction
of the system electrics.
•
Do not use petrol, solvents or vaporizing solution as these may deform or damage
the shrouds.
Suggestions
Please store the scooter in a location where it is away from the direct sunlight, rain, or
dew. When storing for a long time, please charge the battery to full power and then
disconnect the battery terminal. For details inquire to your scooter dealer.
8.3 STORAGE
Make sure the scooter is stored under the following circumstances:
•
Make sure the seat is set in the “Forward” position.
•
Make sure the Power switch is turned to OFF.
•
Operating conditions (-25°C~+50°C) and storage conditions(-40°C~+65°C).
8.4 MOVING ABOUT
•
Turn the power switch “OFF” before moving.
•
Lift the scooter by the chassis, and not by the bumpers. Lifting the scooters by the
bumper could cause damage or injury.
•
For your safety, always ask for help if required. You will need 2 or 3 persons when
moving or lifting the scooter.
1.
When tread groove is below 0.5mm it can easily lead to scooter slippage,
making braking distances longer. Therefore replace the tires as early as
possible when they do not have insufficient tread depth.
2.
When conducting maintenance of your scooter, please turn the power
switch to OFF and remove the charger cords
ATTENTION!