6. TROUBLESHOOTING
6.1 SOFT RESET
If your FREECOM 1 stops responding, reset it by either:
●
Turning it off and then on again (see
Switching Your Unit On/Off
on page 6).
●
Using the supplied USB cable, connect your computer or wall charger to the FREECOM 1 USB port for
30 seconds.
6.2 RESET PAIRING
This option deletes all paired devices.
To reset pairing:
●
Press
and
for 5 seconds. The LED flashes purple slowly five times, then the unit turns off.
6.3 RESET TO FACTORY SETTINGS
This option deletes all paired devices and all configuration settings.
To perform a factory reset:
1.
Check that your FREECOM 1 is in Standby (see
FREECOM 1 Modes and Events - LED Indications
on page
18).
2.
Simultaneously press
+
+
for 5 seconds. The LED flashes purple slowly five times, then the unit
turns off.
6.4 FAQ
Additional answers to common problems can be found at
www.cardosystems.com/faqs
.
15
Содержание FREECOM 1
Страница 1: ...MANUAL...
