CARDIOSTRONG TX-50, Руководство по сборке и эксплуатации

Страница: 18 / 52

TX 50
18
Step 8: Alignment of the feet
If the floor is uneven, you can stabilize the treadmill by turning the two setting screws under the
main frame.
⚠ WARNING
The treadmill is equipped with high-pressure shock absorbers that can cause the treadmill
to suddenly open if handled incorrectly. For more information, refer to the general assembly
instructions.
1. Lift the treadmill on the desired side and
rotate the setting screws under the main
frame.
2. Rotate the screws clockwise in order to
remove them and to raise the running
surface.
3. Rotate them counterclockwise in order
to lower the running surface.
Step 9: Connecting the device to the mains supply
ड ATTENTION
The device must not be connected to a multiple socket, otherwise it cannot be guaranteed that
the device will be supplied with sufficient power. Technical errors can result.
Plug the power plug into a wall outlet that complies with the instructions in the chapter on electrical
safety.
DOWN
UP