BX
50
21
Step 9:
Alignment of the feet
To ensure that your unit is level and firmly
seated on the floor, adjust the rear stand (
C
)
adjustment caps (
C1
and
C2
) by turning them.
Step 10:
Connecting the appliance to the mains supply
ड
ATTENTION
The device must not be connected to a multiple socket, otherwise it cannot be guaranteed that
the device will be supplied with sufficient power. Technical errors can result.
Plug the power plug into a wall outlet that complies with the electrical safety instructions in the
chapter on electrical safety.
2.4
Instrument Setting
2.4.1
Horizontal Seat Adjustment
To move the saddle (
H
) forwards or backwards, first loosen the knob (
F4
) a little and then pull it out.
Move the basement (
F2
) on the seat tube (
F
) to the desired position. Snap the knob back in and
tighten.
2.4.2
Vertical Seat Adjustment
To adjust the seat height, first slightly loosen the knob
(
A46
) on the seat tube (
F
) of the main frame (
A
). Then
pull out the knob (
A46
) a little and move the seat
tube (
F
) to the desired height. Then let the knob (
A46
)
engage again and turn it tight again.
Содержание Ergometer BX50
