background image

EX

60

 

36

STORAGE AND TRANSPORT

4.1 

General Instructions

 

ATTENTION

 

+

Make sure that the equipment is protected from moisture, dust and dirt in the selected 

storage location. The storage location should be dry and well ventilated and have a constant 

ambient temperature between 5°C and 45°C. 

 

WARNING

 

+

The storage location should be chosen so that improper use by third parties or children can 

be prevented. 

 

+

If your equipment does not have transportation wheels, the equipment must be 

disassembled before transportation.

4.2 

Transportation Wheels

 

ATTENTION

If you want to transport your equipment over particularly sensitive and soft floor coverings, such 

as parquet, planks or laminate, lay out the transport route with cardboard or similar to avoid 

possible floor damage. 

1.  Stand behind the equipment and lift it until the weight is transferred to the transportation wheels. 

After that, you easily can move the equipment to a new position. For long transport distances 

the equipment should be disassembled and safely packed.

2.  Select the new location by following the instructions in the section 1.4 of this manual.

Содержание CST-EX60





















































Отзывы: