CARDIOSTRONG CST-BX40, Руководство по сборке и эксплуатации

Страница: 14 / 44

BX 40
14
Step 2: Assembly of handle, console and saddle
(1) Place the handle (3) on the console mast (2) and mount it with the quick release
lever (19). Insert the hand pulse sensor cable (82) from the handle through the cable
sleeve (88) and pull it up through the opening in the console mast (2).
(2) Connect the console cable (80) and the hand pulse sensor cable (82) with the
console (48). Mount the console (48) on the console mast (2) with four M5x12L cross-
headed screws (41) and the Phillips screwdriver (43).
(3) Use the 13mm/15mm Allen wrench (79) to mount the pedals (15 L+R) on the
pedal crank. The right pedal must be screwed tight clockwise and the left one
counterclockwise.
(4) Loosen the pre-mounted screws and washers under the seat (20). Place the
mounting bracket under the seat and mount the parts with the previously loosened
nuts and washers (three M8x7T nuts and three 8x20x1.5T washers) and a 13/14 mm
wrench.
(5) Move the seat (20) on to the seat bracket (7) and use the 14/15 mm wrench (79) in
order to mount the seat with the nuts.
(6) Insert a screw (71) through the seat (20) and the seat rail (6) and mount it with one
3/8”x30x2T washer and 1x resistance knob (52).