2.0 FRONT PANEL CONTROLS
STETH
This is an input for the Cardionics stethoscope, cat. no 718-7030.
FILTER
This control labeled "Filter" is a high-pass filter, that is, it will pass the
sounds through to the stethophone above the value at which it is set. For
example, when set at 40 Hz all sounds above 40 can be heard and
sounds below 40 Hz will not be heard.
VOLUME
This control turns the system ON and OFF and controls the volume
going to the stethophones on the rear panel. Be sure to turn the system
OFF when finished.
3.0 REAR PANEL CONTROLS
STETHOPHONE
There are five stethophone outputs on the rear panel.
Insert the 1/4 inch jack of the each stethophone into one of these outputs
and the sound will be heard.
POWER ON/OFF
This turns the system ON and OFF.
2