2
3
4
5
7
8
9
10
11
7
IMPORTANT:
ISOLATE YOUR COMBINATION MICROWAVE OVEN FROM THE ELECTRICAL
SUPPLY BEFORE PERFORMING INSTALLATION OR MAINTENANCE.
Installation should be carried out according to the instructions by an electrician.
The manufacturer declines all responsibility for any damage to persons, animals or
materials due to incorrect installation.
FITTING THE APPLIANCE
Fit the appliance into its surround (beneath a
worktop or above another appliance in a tall
housing) by inserting screws and plastic covers
into the 4 holes (A - fig.3) that can be seen in the
frame of the oven when the door is open.
For the most efficient air circulation, the
microwave oven should be fitted according
to the dimensions shown in fig.1
The rear panel of the cabinet
must be removed so that air can
circulate freely. The panel to
which the microwave oven is
fitted should have a gap of at
least 35mm at the rear for
ventilation as well as a 500 x
70mm cutout in the shelf under
the microwave oven (fig.4 &
fig.5).
Plastic cover
Fig.3
Installation
500 x 70
cut-out in
cabinet
450
565
min.
550
min.
550
595
453.6
21.6
547.4
note: all dimensions in mm
Please keep this instruction manual for future reference
