13
Starting A Wash Cycle
1.
Draw out the lower and upper basket, load the dishes and push them back.
It is recommended to load the lower basket first, then the upper one.
2.
Pour in the detergent.
3.
Insert the plug into the socket. The power supply refer to last page ”Product fiche”.
Make sure that the water supply is turned on to full pressure.
4.
Close the door and press the Power button to switch on the machine.
5.
Choose a program, the response light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time
otherwise, the detergent may have already been released and the dishwasher
may have already drained the wash water. If this is the case, the dishwasher
needs to be reset and the detergent dispenser must be refilled. To reset the
dishwasher, follow the instructions below:
1.
Press the Start/Pause button to pause the washing.
2.
Press th
e
program button for more than 3 seconds - the program will cancel.
3.
Press the program button to select the desired program.
4.
Press the Start/Pause button, after 10 seconds, the dishwasher will start.
3 sec
