Cardinal PZ30W, Руководство пользователя

Страница: 7 / 16

8528-00412-0M Rev A

PZ30W / PZ60W O
wner’s
3
PREPARING SCALE FOR WEIGHING
Before Weighing
1. Place the scale on a stable, vibration-free level surface away from direct sunlight and
any rapidly moving air source (heating/cooling vents, fans, etc.). This will prevent
sudden temperature changes and air currents that may result in unstable weight
readings.
2. Make sure that the distance between the scale base and the wireless display is within
30 feet (10 meters).
3. S
elect the scale’s channel to match the wireless display. (The scale’s channel indicator
is located on the scale’s base; please remove the rubber stopper to access the
channel indicator). For example: If the wireless display is using Channel-1, select
Channel-1 for the scale. (Please see Page 5 for instructions for selecting scale base
channels).
NOTE:
If the scale’s channel is not same as the wireless display, ‘88888’ will appear on the
display. Set the scale and wireless display to the same channel.
Weighing
1. Turn on the scale base by pressing the power switch located on the underside of the
scale base.
2. Press the ON/OFF button on the display to turn on the display.
3.
‘88888’ will appear on the display, then ‘0’ and ‘ ’ will flash. The scale is ready for
weighing.
NOTE:
If the “88888” display and ‘0’ does not show and the ‘ ’ flash, press the
button to change the wireless display’s channel to match the scale’s channel. For example:
i
f the scale’s channel is set to Channel-1, please select Channel-1 for the wireless display
also.
Power
Switch