background image

8529-M635-O1

y

 DS-30 

Page 3

PRECAUTIONS

Before using this instrument, read this 
manual and pay special attention to all 
"WARNING" symbols: 

IMPORTANT 

 ELECTRICAL 

 WARNING 

INTRODUCTION

Thank you for purchasing our Detecto DS Series Price Computing Scale.  Your scale has been 
designed to operate from 115 VAC 50/60 Hz (optional 230 VAC 50/60 Hz) or with the 

included

rechargeable battery pack.  The battery pack is able to provide 100 hours continuous operation 
(with backlight on) or 200 hours continuous operation (with backlight off). 

This manual will guide you through setup and operation of your scale.  Please read it 
thoroughly before attempting to operate this scale and keep it handy for future reference. 

FCC COMPLIANCE STATEMENT  

WARNING! 

This equipment generates uses and can radiate radio frequency and if not 

installed and used in accordance with the instruction manual, may cause interference to radio 
communications.  It has been tested and found to comply with the limits for a Class A 
computing device pursuant to Subpart J of Part 15 of FCC rules, which are designed to provide 
reasonable protection against such interference when operated in a commercial environment.
Operation of this equipment in a residential area may cause interference in which case the 
user will be responsible to take whatever measures necessary to correct the interference. 

You may find the booklet "How to Identify and Resolve Radio TV Interference Problems" 
prepared by the Federal Communications Commission helpful.  It is available from the U.S. 
Government Printing Office, Washington, D.C. 20402.  Stock No. 001-000-00315-4. 

All rights reserved.  Reproduction or use, without expressed written permission, of editorial or 
pictorial content, in any manner, is prohibited.  No patent liability is assumed with respect to 
the use of the information contained herein. While every precaution has been taken in the 
preparation of this manual, the Seller assumes no responsibility for errors or omissions.  
Neither is any liability assumed for damages resulting from use of the information contained 
herein.  All instructions and diagrams have been checked for accuracy and ease of application; 
however, success and safety in working with tools depend to a great extent upon the individual 
accuracy, skill and caution.  For this reason the Seller is not able to guarantee the result of any 
procedure contained herein.  Nor can they assume responsibility for any damage to property or 
injury to persons occasioned from the procedures.  Persons engaging the procedures do so 
entirely at their own risk. 

Serial Number

_______________________

Date of Purchase 

____________________

Purchased From

_____________________

___________________________________

___________________________________

RETAIN THIS INFORMATION FOR FUTURE USE 

Содержание DS Series

















Отзывы: