8525-0358-0M Rev-A
•
DR550C Operation
2
INSTALLATION
Unpacking
Before beginning installation of your scale, make certain the instrument has been received in
good condition. When removing the scale from its packing, inspect it for signs of damage,
such as exterior dents and scratches. Keep the carton and packing material for return
shipment if it should become necessary. It is the responsibility of the purchaser to file all
claims for any damages or loss incurred during transit.
1.
Remove the scale from the shipping carton and inspect it for any signs of damage.
2.
Plug-in the supplied 9VDC power supply or install (6) AA 1.5V alkaline battery. Refer to the
POWER SUPPLY or BATTERY sections of this manual for more instruction.
3.
Place the scale on a flat level surface, such as a table or bench.
4.
The scale is now ready for use.
Power Supply
To apply power to the scale using the supplied 9VDC, 100 mA power supply, insert the plug
from the power supply cable into the power jack on the back of the scale and then plug power
supply into the proper electrical outlet. The scale is now ready for operation.
Battery
The scale can use (6) AA 1.5V alkaline batteries (
not included
). If you wish to operate the
scale from batteries, you must first obtain and install the batteries. The batteries are contained
in a cavity inside the scale. Access is via a removable door on the top cover of the scale.
Battery Installation
The DR550C Digital Scale operates with (6) “AA”
batteries (Alkaline preferred).
1.
Place unit upright on a flat surface and lift platform
from top of scale.
2.
Remove battery compartment door and insert
batteries into compartment. Make certain to observe
the correct polarity.
3.
Replace compartment door and platform cover on
scale.
Mounting the Unit
1.
Mount bracket to wall using (2) screws that are
appropriate anchors for the surface being mounted
to.
2.
Lower control panel into mounted bracket. Insert flat
tip screws (included) through round holes in
mounting bracket and drive the screws into existing
threaded holes in lower half of control panel to
secure control panel to bracket.
Содержание DR550C
Страница 8: ...8525 0358 0M Rev A DR550C Operation 6 ...
