5
CONFIGURATION, Cont.
To select “g” (gram) weighing units:
1. With the display showing
(1.<
, press the
ZERO
key and then
UNIT
key 3 times. The
display will change to show “g”.
2. Press
ZERO
key to display g (gram) status.
3. Press the
UNIT
key to toggle between:
Enable (display will change to
$1
) or
Disable (display will change to
$
).
4. Press the
ZERO
key and then the
UNIT
key 2 times. The display will change to
(1.<
.
5. Proceed to AUTOMATIC SHUTOFF.
To select “lb” (pounds only) weighing units:
6. With the display showing
(1.<
, press the
ZERO
key and then
UNIT
key 4 times. The
display will change to show “lb”.
7. Press
ZERO
key to display lb status.
8. Press the
UNIT
key to toggle between:
Enable (display will change to
$1
) or
Disable (display will change to
$
).
9. Press the
ZERO
key and then the
UNIT
key. The display will change to
(1.<
.
10. Proceed to AUTOMATIC SHUTOFF.
AUTOMATIC SHUTOFF
1. With the display showing
(1.<
, press the press
UNIT
key. The display will change to
show
$
.
2. Press the
ZERO
key to begin selection of the automatic shut-off time (in seconds). The
display will change to show
.
3. Press the
UNIT
key to toggle through the selections,
,
,
,
, or
$
.
4. When the desired time is displayed, press the
ZERO
key. The display will change to show
$
.
5. Proceed to GRAVITY COMPENSATION.
GRAVITY COMPENSATION
1. With the display showing
$66
, press the press
UNIT
key. The display will change to
show
&(
.
2. With the display showing
:=
:
To Enable the Gravity Compensation mode, press the
UNIT
key. The display will
change to
$1
.
To Disable the Gravity Compensation mode, press the
UNIT
key The display will
change to
$
.
3. Press the
ZERO
key again. The display will change to show
:=
.
4. Press the
UNIT
key. The display will change to show
14
.
5. Press the
ZERO
key to save the settings and reset the scale.
6. Setup is complete.
