Cardinal Detecto 6855, Руководство по эксплуатации, Страница: 5 / 16

1930-M458-O1
y
Waist-High 685X Series Page 3
UNPACKING INSTRUCTIONS
•
Remove staples or cut along bottom of carton. Lift carton off pallet.
•
Check for any damage incurred in shipping. If scale has been damaged, place a claim
with the carrier. It is the responsibility of the purchaser to file all claims for any damages
or loss incurred during transit. Use the original carton and shipping material to return
the scale.
•
Cut packing straps securing scale to pallet.
•
To remove scale from pallet, at the back of the scale lift up with equal force from the
column and at the platform base near the wheels on the scale. Set gently on floor.
•
Remove all plastic wrapping, foam fillers and cardboard material from the scale.
•
Remove and unpack the power supply and cord, if the scale was ordered with this
option.
CARE AND CLEANING OF SCALE
•
DO NOT subject the platform to sudden shocks.
•
DO NOT submerge indicator in water, pour or spray water directly on indicator.
•
DO NOT use acetone, thinner or other volatile solvents for cleaning.
•
DO NOT expose scale to temperature extremes.
•
DO NOT place scale in front of heating/cooling vents.
•
DO NOT place scale in an area where it might be exposed to moisture.
•
DO clean the indicator with a damp soft cloth and mild non-abrasive detergent.
•
DO remove power before cleaning with a damp cloth.
•
DO provide clean AC power and adequate protection against lightning damage.
•
DO keep the surroundings clear to provide clean and adequate air circulation.
ERROR AND STATUS DISPLAYS
Display Meaning
-Err-
General error, invalid keypad entry was attempted.
-OF-
Attempting to display a negative number greater than –9,999 or a
positive number greater than 99,999
-trL- Indicates an attempt to zero a weight outside scale zero range.
(See Four Percent Zero Tracking Range Limit).
-UnS- Motion is present when indicator is attempting to perform one of the
following operations: Power Up Zero or Zero Weight Display
CALib Indicates calibration is necessary.
AdErr
ErrAL
ErrAH
Consult your scale service representative.
OCAP
Scale weight exceeds scale capacity
OFF
Displayed to indicate indicator is turning off.