1
FCC COMPLIANCE STATEMENT
WARNING! The 6475 and 6475K generate,
use and can radiate radio frequency energy
and if not installed and used in accordance
with the instructions manual, may cause
interference to radio communications. It has
been tested and found to comply with the
limits for a Class A computing device
pursuant to Subpart J of Part 15 of FCC
Rules, which are designed to provide
reasonable protection against such
interference when operated in a commercial
environment. Operation of this equipment in
a residential area is likely to cause
interference in which case the user at his
own expense will be required to take
whatever measures necessary to correct the
interference.
All rights reserved. Reproduction or use, without
express permission, of editorial or pictorial
content, in any manner, is prohibited. No patent
liability is assumed with respect to the use of the
information contained herein. While every
precaution has been taken in the preparation of
this book, we assume no responsibility for errors
or omissions. Neither is any liability assumed for
damages resulting from the use of the
information contained herein. All instructions and
diagrams have been checked for accuracy and
ease of application; however, success and safety
in working with tools depend to a great extent
upon the individual accuracy, skill and caution.
For this reason, we are not able to guarantee the
result of any procedure contained herein. Nor
can we assume responsibility for damage to
property or injury to persons occasioned from
the procedures. Persons engaging the
procedures do so entirely at their own risk.
SERIAL NUMBER _______________________
DATE OF PURCHASE ___________________
PURCHASED FROM ____________________
_______________________________________
_______________________________________
RETAIN THIS INFORMATION FOR FUTURE USE
UNPACKING INSTRUCTIONS
Remove scale from its packing and inspect it for
signs of shipping damage, such as exterior
dents and scratches. Keep the carton and
packing for return shipment or relocation if it
should become necessary. It is the responsibility
of the purchaser to file all claims for any damage
or loss incurred during transit. If no damage is
seen, then remove straps from between base
and platform.
SETUP AND OPERATION
The scale has been assembled at the factory.
Refer to Instructions for your model. For digital
models also refer to Owner’s Manual of the
digital indicator for additional information.
To use the scale, set on firm and level surface.
Raise arms and footrest out of your and the
patient’s way. Assist the patient to a setting
position. Lower the arms and footrest. (Note: The
arms and footrest are for the patient’s comfort
during weighing.) After weighing the patient,
raise arms and footrest out of the way and assist
the patient out of the chair.
CAUTION!
This instrument is not
intended for patient transport.
475 AND 4751
To balance
scale, move both
poises to zero
(0) and turn
balance screw to
right or left until
scale balances.
6475, 6475K
and 6475KGEU
Press
ON/OFF
key to turn display on. With the
display on, press the
ZERO
key to zero the
weight display. Set patient on the scale as
described above. When weight is stable, press
the
LOCK/RELEASE
key to lock on to the
weight. Note that weight value will be flashing.
Read the patient weight. Remove patient from
the scale and press
LOCK/RELEASE
key to
unlock the display and prepare for the next
weighing operation or press
ON/OFF
key to turn
display off.
Poises
Balance
Screw
