Cardinal 6127 Series, Руководство по эксплуатации

Страница: 10 / 20

8525-M310-O1 Rev E

612X Series and 633X Series
6
HEIGHT ROD INSTRUCTIONS
(Waist-High Models)
Height Rod Hole Location
Please check the Height Rod hole
locations before installing the Height Rod.

Some models may require holes to
be drilled.

Please follow the measurements for
drilling holes if necessary.

After holes have been drilled, please
follow installation instructions.
Height Rod Installation
1. Remove the height rod, height rod
brackets and hardware pack from
the cardboard insert.
2. Attach the height rod brackets to the
height rod using the four screws,
lock washers and nuts enclosed in
the hardware pack. Tighten all four
screws.
2in (51mm)
IMPORTANT!
Measure from bottom of column,
not floor or scale base.
29
47/64”
(75.5 cm)
5
15/64”
(13.3 cm)
9/64”
(3.5mm)
diameter holes,
1” (25.4mm) from
center of column
to center of hole
Height Rod
Height Rod
Bracket