16
Shelves
All the units come standard with wire shelves. Each unit has different number of shelves. Refer to Table 3 for
more information.
Maximum shelf capacity is 45 kg (100 lbs) for full shelves and 22.5 kg (50 lbs) for half shelves.
For safe shipping, the shelves are packaged and secured inside the cabinet. Insert the shelf support hangers
(included with the manual inside the unit) into the built-in shelf supports (located on the inside walls of the
cabinet interior) at the desired locations.
Figure 2. Shelf Arrangement
Figure 3. Shelf Clip
Installation Instructions
WARNING:
Do not move this unit while it is loaded..
1. Determine appropriate location for shelves clips, the reference number on the pilaster can serve as a guide
to ensure all clips are properly located.
2. Insert top of the clip into the desired hole of the pilaster. Ensure that the retaining tab should be facing
upwards.
3. Rotate the clip downwards and insert the bottom tab into the appropriate hole, the clip may be squeezed
slightly during installation.
4. Install shelves onto clips with the product retention bar facing upwards, be careful not to dislodge clips
during shelf installation.
